Utah Fire Prevention: Salt Lake City Fire Prevention

Utah Fire Prevention | Fire Suppression Systems, Hood Exhaust Cleaning, Fire Alarms
3333 S 900 E Ste. 100, Millcreek, UT 84106
801-935-4012

------------------------------------------------------

How to Clean Grease Trap Screens in Range Hoods

Grease traps are designed to keep fats, oils, and other greasy substances from entering your building’s ventilation or sewage system. If they begin to overflow, your hood system may begin to fail. The size of your grease traps can affect how often they need to be cleaned. Adhere to the following steps to keep them in good condition:

Remove grease traps: Remove the grease traps from your range hood.
Remove grease: Proceed to remove as much grease from them as you can. Be sure to place the grease in a separate container and refrain from rinsing it down a drain.
Eliminate remnants: Using a non-abrasive scrubbing pad or soft bristle brush, scrub any remaining grease from the traps.
Prepare degreasing solution: Using warm water and a liquid degreaser, create a cleaning solution in your sink. Be sure to check your degreaser bottle to find the appropriate water ratio.
Soak traps: Once the sink has been prepared, soak your grease traps in the solution.
Remove traps from solution: After waiting 5-10 minutes, remove the traps from the sink.
Dry: Allow your grease traps to air dry before re-installing them in your kitchen hood.

-----------------------------------------------------

- https://utahfireprevention.com
- https://goo.gl/maps/jMbNhc1uUve6SbVR9

"Utah Fire Protection"

#Fire-Suppression-Systems
#Hood-Exhaust-Cleaning
#Fire-Alarms

Fire Suppression Systems, Hood Exhaust Cleaning, Fire Alarms, FIRE EXTINGUISHERS, EMERGENCY LIGHTING, HYDROSTATIC TESTING,

FIRE PROTECTION SERVICE

Accounts:
Yelp